Setting the avhd device skip time, Setting the hdmi, Audio mode – Toshiba Integrated High Definition DLP 62HM15 User Manual

Page 49: Setting the time and date

62HM15

Chapter 6: Setting up your TV

Setting the AVHD device skip time

When you connect an external AVHD (audio/video hard drive)
device—such as the Toshiba Symbio

™

AVHD Recorder—to one of

the TV’s IEEE1394 ports, you can use the AVHD device skip time
feature to set the number of minutes the device will skip forward or
backward when you press the SKIP buttons.

Note:
• This TV will work best with the Toshiba

AVHD Recorder*

for recording high definition and standard definition material and for
controlling live TV (pause/rewind/etc.). When the Toshiba Symbio AVHD
Recorder is connected to the TV, the remote control keys (LIVE, STOP,
REW, PAUSE, PLAY, etc.) are automatically activated to allow pausing of
live TV.

*To enjoy the full benefits of your Symbio AVHD Recorder, you
must first set up the TV Guide On Screen

system (see Chapter

5). Full Symbio AVHD Recorder benefits, including Intelligent
One Touch recording, will not be available unless the TV Guide
On Screen

system is fully operational. Even if the TV Guide

On Screen

system is not fully operational, however, manual

recording is available as long as the TV Guide On Screen

system

has acquired the necessary date and time data. If you experience
any issues with your Symbio AVHD Recorder, please contact
Toshiba Consumer Solutions by calling (800) 631-3811 or by
visiting http://www.tacp.com/customersupport/contact.asp.

• When you connect an AVHD (or a D-VHS) device, the TV Guide

On Screen

system is automatically configured to allow recording.

See page 23 for device connection information. See Chapters 5 and 7 for
details about setting up and using the TV Guide On Screen

system.

Setting the HDMI

™

audio mode

To select the HDMI audio mode:

1. Press MENU and open the

SET UP menu.

2. Highlight HDMI AUDIO

SELECTION and press
ENTER.

3. Press

z or y to select the

HDMI audio mode (Auto,
Digital, or Analog) and press
ENTER. (Auto is the recommended mode). See
“Connecting an HDMI or a DVI device to the HDMI
input” on page 19.

Setting the time and date

Note: If you already set up the TV Guide On Screen

system,

the time and date were set automatically and you can skip this
step.

To set the time and date:

1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set

of INSTALLATION menu icons will appear on-screen, as
shown in step 3 below.)

3. Open the TIME AND DATE menu, highlight

START SETUP, and press ENTER.

Time And Date

Start Setup

Navigate

Select

Back

Exit

DVD RTN

CH RTN

EXIT

If you have not set up the TV Guide On Screen

system,

the following screen will appear. To set the time, highlight
TV GUIDE ON SCREEN

and press ENTER. The

TV Guide On Screen

setup sequence will start, and the

time and date will be set automatically.

Manual

Cancel

TV Guide On Screen

Time And Date

Your TV Guide On Screen System can provide

accurate time and date information.

It is recommended you set up TV Guide On Screen

first and use it to obtain the time and date.

Note:

• If you highlight TV GUIDE ON SCREEN

(above) to set the time

and date through the TV Guide On Screen

system and a power

outage occurs, the time and date will be updated automatically
when the power is restored.

• If you highlight MANUAL (above) to set the time and date

manually and a power outage occurs, you will lose the time and
date settings when the power is restored.

• If you manually set the time and date and then perform TV Guide

On Screen

setup, the manual time and date settings will be

overridden by the TV Guide On Screen

settings.

To set the AVHD device skip time:

1. Press MENU and open the

SETUP menu.

2. Highlight AVHD SKIP

TIME and press ENTER.

3. Press

z or y to select the

AVHD skip time and press
ENTER.

62HM15(E)044-051

6/1/05, 11:02 AM

Black