beautypg.com

Installing the remote control batteries – Toshiba Integrated High Definition DLP 62HM15 User Manual

Page 27

background image

27

Chapter 3: Using the remote control

62HM15

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

MODE

Device mode control after programming

1) TV

Toshiba TV

2) CBL/SAT
3) VCR/PVR
4) DVD

Multi-brand video/audio devices

5) AUDIO 1
6) AUDIO 2

Note:
Although your new TV’s remote control includes
codes for many devices, it may not include
codes for some or all of the features on certain
devices you wish to control. If you are unable to
program the TV’s remote control to operate
your device or some of the features on that
device, use the device’s remote control or the
controls on the device.

MODE

ACTION

ENTER

MENU

100

+10

Your TV remote control has one dedicated TV mode and five programmable
multi-brand modes: CBL/SAT, VCR/PVR, DVD, AUDIO 1, and AUDIO 2.
The default device modes and programmable device modes are listed below.

Note: The TV remote control is preprogrammed to operate most Toshiba devices.
If you own a non-Toshiba device or a Toshiba device that the remote control is not
preprogrammed to operate, you will need to program the remote control. See
“Programming the remote control to operate your other devices” on page 30.

MODE

Default device mode control (before programming)

1) TV

Toshiba TV

2) CBL/SAT

Toshiba Satellite receiver

3) VCR/PVR Toshiba VCR
4) DVD

Toshiba DVD

5) AUDIO 1 Pioneer Audio receiver
6) AUDIO 2 Pioneer LD

Using the remote control MODE button to control your other devices

To install the remote control batteries:

CAUTION: Always dispose of batteries in a designated disposal location.
Never throw batteries into a fire.

1. Slide the battery cover off the back of the remote control.

2. Install two “AA” size alkaline batteries. Match the + and – symbols on

the batteries to the symbols on the battery compartment.

3. Slide the battery cover on to the remote control until the lock snaps.

Installing the remote control batteries

You can directly select the device mode by pressing the corresponding
number button (1-6) while pressing the MODE button.

Number (1-6)

Note:

Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.

Never mix battery types or use new and used

batteries in combination.

When necessary to replace batteries in the remote

control, always replace both batteries with new ones.

Always remove batteries from remote control if they

are dead or if the remote control is not to be used
for an extended period of time. This will prevent
battery acid from leaking into the battery
compartment.

#01E026-033_62HM15

5/24/05, 6:17 PM

27

Black