Toshiba Integrated High Definition DLP 62HM15 - Manual (Page 80)

80
Chapter 8: Using the TV’s features
62HM15
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Using the StableSound ® feature
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound
® feature:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
3. Press
z to highlight STABLE SOUND, and then press •
to select ON.
Navigate Select Back Exit DVD RTN
CH RTN EXIT
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turn off the StableSound feature:
Select OFF in step 3 above.
Adjusting the audio
(continued)
Resetting your audio adjustments
The RESET function returns your audio adjustments to the
following factory settings:
Bass ............. center (50)
Treble .......... center (50)
Balance ........ center (0)
StableSound ... OFF
To reset your audio adjustments:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
3. Press
z to highlight RESET and press ENTER.
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
Navigate Select Back Exit DVD RTN
CH RTN EXIT
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3. Press z to highlight the item you want to adjust (BASS,
TREBLE, or BALANCE).
4. Press x or • to adjust the level.
• x makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
• • makes the bass or treble stronger or increases the balance
in the right channel (depending on the item selected).
5. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To reset the audio quality to the factory settings:
Highlight RESET in step 5 above, and press ENTER.
The bass and treble are reset to 50 and the balance is reset
to 0.
#01E076-081_62HM15 5/24/05, 6:21 PM 80
Black