Toshiba B-852-TS12-QP - Manual (Page 17)

2. PRINTER SETUP ENGLISH VERSION EO1-33028
2.6 Turning the Printer ON/OFF
E2- 6
2.6 Turning the Printer
ON/OFF
2.6.1 Turning ON the Printer
2.6.2 Turning OFF the Printer
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF
your host computer before turning off the printer.
1. To turn ON the printer power, press the power switch as shown in the
diagram below. Note that ( ) is the power ON side of the switch.
2. Check that the ON LINE message appears in the LCD Message
Display and that the ON LINE and POWER LED lights are
illuminated.
1.
Before turning off the printer power switch verify that the ON LINE
message appears in the LCD Message Display and that the ON LINE
LED light is on and is not flashing.
2. To turn OFF the printer power press the power switch as shown in the
diagram below. Note that (
{)
is the power OFF side of the switch.
CAUTION!
Use the power switch to
turn the printer On/Off.
Plugging or unplugging
the power cord to turn the
printer On/Off may cause
fire, an electric shock, or
damage to the printer.
CAUTION!
•
Do not turn off the
printer power while the
media is being printed
as this may cause a
paper jam or damage to
the printer.
•
Do not turn off the
printer power while the
ON LINE light is blinking
as this may cause
damage to your
computer.
Power Switch
Power Switch
NOTE:
If an error message appears
in the display instead of the
ON LINE message or the
ERROR LED lamp is
illuminated, go to Chapter
6.1, Error Messages.