Texas Instruments TMS3320C5515 - Manual (Page 58)

System Configuration and Control www.ti.com
1.7.2.1 Die ID Register 0 (DIEIDR0) [1C40h]
The die ID register 0 (DIEIDR0) is shown in Figure 1-27 and described in Table 1-36 .
Figure 1-27. Die ID Register 0 (DIEIDR0) [1C40h]
15 0
DIEID0
R
LEGEND: R = Read only; -n = value after reset
Table 1-36. Die ID Register 0 (DIEIDR0) Field Descriptions
Bit Field Value Description
15-0 DIEID0 0-FFFFh Die ID bits.
1.7.2.2 Die ID Register 1 (DIEIDR1) [1C41h]
The die ID register 1 (DIEIDR1) is shown in Figure 1-28 and described in Table 1-37 .
Figure 1-28. Die ID Register 1 (DIEIDR1) [1C41h]
15 14 13 0
Reserved DIEID1
R R
LEGEND: R = Read only; -n = value after reset
Table 1-37. Die ID Register 1 (DIEIDR1) Field Descriptions
Bit Field Value Description
15-14 Reserved 0 Reserved.
13-0 DIEID1 0-3FFFh Die ID bits.
1.7.2.3 Die ID Register 2 (DIEIDR2) [1C42h]
The die ID register 2 (DIEIDR2) is shown in Figure 1-29 and described in Table 1-38 .
Figure 1-29. Die ID Register 2 (DIEIDR2) [1C42h]
15 0
DIEID2
R
LEGEND: R = Read only; -n = value after reset
Table 1-38. Die ID Register 2 (DIEIDR2) Field Descriptions
Bit Field Value Description
15-0 DIEID2 0-FFFFh Die ID bits.
58 System Control SPRUFX5A – October 2010 – Revised November 2010
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated