TANDBERG High Definition Professional Recevier/Decoder TT1280 - Manual (Page 49)

Operating the Equipment Locally
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page 3-13
ST.RE.E10141.5
3.7.4 Setting Up Asynchronous Data (RS-232)
These menu pages allow status monitoring and configuration of the
low speed data.
Table 3.14: Setting Up Async Data
Step Action Result
1 Go to Menu 3.5 and press Edit. Select the
data stream PID. Selects the data stream.
2 Scroll to Menu 3.5.1 and edit the
low speed data output (ENABLED or
DISABLED). Press Save. The unit receives and displays the correct bit-rate.
3.7.5 Setting Up High-speed Data over Ethernet
These menu pages allow status monitoring and configuration of the
high-speed data over Ethernet software option.
Table 3.15: Setting Up High-speed Data over Ethernet
Step Action Result
1 Go to Menu 3.7 and press Edit. Select the
data stream PID. Selects the data user PID number.
2 Scroll to Menu 3.7.1 and edit the
High-speed data output (ENABLED or
DISABLED). Press Save. The unit receives and displays the correct bit-rate.
3 Scroll to Menu 3.7.3 and edit the Forward to
Gateway ON/OFF and the Gateway IP
address menu. Press Save. If the Forward to Gateway option is turned on, the unit will forward
the data stream to the gateway address given.
3.7.6 Setting Up High-speed Synchronous Data (RS-422)
These menu pages allow status monitoring and configuration of the
synchronous high-speed data.
Table 3.16: Setting Up Synchronous High-speed Data
Step Action Result
1 Go to Menu 3.6 and press Edit. Select the
data stream PID. Selects the data stream.
2 Scroll to Menu 3.6.1 and edit the
High-speed data output (ENABLED or
DISABLED). Press Save. The unit receives and displays the correct bit-rate.