TANDBERG High Definition Professional Recevier/Decoder TT1280 - Manual (Page 16)

Introduction
Page 1-8 Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
1.3.3 What the Satellite Receiver Does
The Receiver can be tuned to a specified satellite channel frequency and
polarisation. The input is down-converted via a Low-Noise Block (LNB) to
provide an L-band input to the Receiver. The front-end tuning is
microprocessor controlled with a frequency synthesised local oscillator. A
software tuning and acquisition algorithm resolves translation errors
(mainly due to the LNB).
The signal is then passed to a demodulator that recovers the signal using
soft-decision decoding. The resulting stream is Reed-Solomon decoded and
descrambled to provide inputs to the Decoder circuit. The received channel
may contain multiple Services, therefore the Receiver’s demultiplexer is
configured to select a single video Service and other audio/data
components and present them at the output.
Figure 1.3: What the Satellite Receiver Does
TT1280/TT1282 Satellite Receiver
f
n
f
n+1
f
n+2
f
n+3
f
n+4
horizontal
polarisation
vertical
polarisation
SHF
Low-Noise Block
L-band
Tune to a
satellite
channel
Select a
Service from
the satellite
channel
Multiple satellite channels
Multiple Services on the tuned satellite channel
Select the
components from
the chosen Service
Video
Audio
Data
Transport Stream
Multiple components on the selected Service