Toshiba 255 - Manual (Page 119)

4.PRINTING FROM UNIX/Linux
Printing from an Application 117
4 PRINTING FROM UNIX/Linux
‰ Media Type
The paper source can be selected using the following options to specify the media type.
In PostScript, Deferred Media Selection is always turned on so the paper size has priority over the media type and the
paper source.
In PCL5e, the paper size always has priority over the media type and the paper source.
If this option is not specified, the default value will be used.
Example: The command to specify Thick1 media type is “lp -d -o mtype=Thick1 ”.
‰ Paper Source
The paper source can be selected using the following options.
In PostScript, Deferred Media Selection is always turned on so the paper size has priority over the paper source. In
PCL5e, the paper size always has priority over the paper source.
If this option is not specified the command will not be sent so the printer’s default value will be used.
Example: The command to specify the drawer 1 paper source is “lp -d - o drawer1 ”.
‰ Duplexing
The current duplex mode can be specified using the following options.
If this option is not specified, the default value “simplex” will be used.
It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately can override the booklet
mode setting for duplexing.
Example: The command to specify long edge duplexing is “lp -d -o duplex ”.
Option Value Alternate Value Description
mtype=Plain The paper source that contains Plain paper is
requested.
mtype=
Transparency The paper source that contains Transparency Slides is
requested.
mtype=Thick1 The paper source that contains Thick1 paper is
requested.
mtype=Thick2 The paper source that contains Thick2 paper is
requested.
mtype=Thick3 The paper source that contains Thick3 paper is
requested.
Option Value Alternate Value Description
auto-source Select auto paper tray selection.
manual Select Bypass Tray.
drawer1 upper
cas1 Select the 1st drawer.
drawer2 lower
cas2 Select the 2nd drawer.
drawer3 pedupper
cas3 Select the 3rd drawer (optional).
drawer4 pedlower
cas4 Select the 4th drawer (optional).
lcf tandem Select the Large Capacity Feeder (optional). The Large
Capacity Feeder (optional) is not available for some
countries or regions.
Option Value Alternate Value Description
simplex Turn duplexing off.
duplex lduplex
duplex_long
duplex=long
hduplex Turn duplexing on with long edge binding.
sduplex duplex_short
duplex=short
vduplex Turn duplexing on with short edge binding.