Toshiba TDP-B1 - Manual (Page 24)

17
Standby
When you press standby , the display and audio turn off and a blank
screen is displayed for 15 minutes. You can change the amount of time
the projector stays in standby mode; see “Standby Time” on page 23 for
details.
• If you press standby again within 15 minutes, the projector returns to
normal operations immediately.
• If you press standby again after 15 minutes, there is about a 60 second
delay before the lamp turns back on.
• If you don’t press standby again, the lamp turns off after 15 minutes.
Volume (keypad only)
To increase the volume, press volume + . To decrease the volume,
press volume - .
Volume adjustments are saved for each source you have connected.