Toshiba TDP-B1 - Manual (Page 23)

16
U s i n g t h e P r o j e c t o r
Using the Keypad and Remote Buttons
While the menus are displayed, the volume, source, and standby buttons
on the keypad act as menu navigation buttons. See “Using the On-
Screen Menus” on page 18 for details.
F IGURE 11
Keypad and remote buttons
Lamp on/off (keypad only)
Press the lamp on/off button to turn the lamp on or off. The Lamp LED
indicates the state of the lamp. A green Lamp LED indicates that you
can turn the lamp on, or the lamp is currently on. An orange LED indi-
cates the software is initializing or the lamp is cooling. Do not press the
lamp on/off button when the LED is orange.
Menu
Press the menu button to open the on-screen menus. Press menu again to
close the menus. When you close the menus, the projector saves any
changes you made. For more information about the on-screen menus,
see page 18.
Source (keypad only) or Computer and Video (remote only)
When you have more than one source (computer and video) connected
to the projector, select between them by pressing the
source button on
the keypad or the computer or video button on the remote.
lamp LED