Toshiba TDP-B1 User Manual
Page 15
8
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Do you want to control the computer’s mouse from the projector’s remote
or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
1 Plug the end of the PS/2 mouse cable with 6 pins into the mouse
connector on your computer.
2 Plug the end of the PS/2 mouse cable with 9 pins into the
con-
nector on the projector.
If your computer has a USB connector and is running Windows 98, use the
USB mouse cable.
NOTE: The USB mouse is
supported for use with
Windows 98 only.
1 Plug the
end of the USB mouse cable into the mouse
connector on your computer.
2 Plug the
end of the USB mouse cable into the
connector on
the projector.
You must have the appropriate USB drivers installed on your computer
to use the USB feature. Windows 98 ships with the appropriate drivers.
Now you’re ready to power up the projector and your laptop. Skip to
“Powering up the Projector and Adjusting the Image” on page 11.
NOTE: You do not need to
restart your computer after
connecting a USB mouse to use
it (it is hot-pluggable). You must
restart your computer after
plugging in a PS-2 mouse.