Generating the configuration page – Tektronix 220e User Manual
Page 93
Troubleshooting
6
User Manual
6-13
Generating the configuration page
The Phaser 220 can generate a configuration page that contains useful
information for installation and troubleshooting.
There are two ways to generate the configuration page:
■
Use the printer’s rear panel DIP switches.
1.
Set Switches 2, 3, and 4 down.
2.
After about five seconds, set Switch 4 up (leave Switches 2 and
3 down). The printer generates the configuration page as soon
as the switches are set (you do not have to reset the printer).
■
Send a PostScript language file to the printer.
For information on
how to generate the configuration page by sending a PostScript
language file to the printer, see the manual Phaser 220 Drivers and
Utilities Printing Reference.
This manual is related to the following products: