Tektronix 220e - Manual (Page 5)

User Manual v
Contents
1 Introduction
2 Getting Set Up
At a glance 2-1
Setting up the printer 2-2
What you get with your printer 2-2
Installing the optional lower tray assembly 2-4
Removing the packing material from inside the printer 2-6
Install the transfer roll 2-7
Adding paper or transparencies 2-8
Connecting the printer 2-12
Printer ports 2-12
LocalTalk connection 2-13
Connecting the printer to a single computer using LocalTalk 2-14
Parallel connection 2-15
Serial connection 2-16
Ethernet connection (Phaser 220i only) 2-18
Connecting the power and turning on the printer 2-19
Front panel at power-up 2-20
Rear panel at power-up 2-21
Sample prints 2-21
Startup page 2-22
When the printer is ready for operation 2-22
Installing a driver on your computer 2-23
Phaser 220 drivers and utilities diskettes 2-23
PC users 2-23
Microsoft Windows 2-23
DOS 2-25
Macintosh users 2-26
Other software requirements 2-26
Workstation users 2-27
Turning off the sample prints 2-27
Turning off the startup page 2-27