Tektronix 220e - Manual (Page 56)

3 Printing
3-14 Phaser 220i and Phaser 220e Color Printers
Printer languages: PostScript, HP-GL, PCL5
With Adobe IntelliSellect™ technology, Phaser 220 printers can
automatically sense the language of the print job and process it accordingly.
This is called automatic language selection. You can also set up any printer
port to receive one language only. If you set up a port to receive a particular
language only, the port will only accept jobs of that type. The printer reports
an error if another language is sent to that port.
The following table shows the default language setting for each port.
Enabling and disabling automatic language switching
To enable or disable automatic language selection on a port, send the
appropriate PostScript language file to the printer. For more information,
see the manual Phaser 220 Drivers and Utilities Printing Reference.
Default printer port settings
Port Language
Serial PostScript
Parallel PostScript
LocalTalk PostScript
EtherTalk PostScript
LPR PostScript
AppSocket Automatic language switching
NetWare Automatic language switching