Tektronix 220e - Manual (Page 26)

2 Getting Set Up
2-14 Phaser 220i and Phaser 220e Color Printers
Connecting the printer to a single computer using LocalTalk
You can use LocalTalk connectors and cables to connect the printer directly
to your computer, without connecting it to any other network. Make sure
that the printer is turned off before making any LocalTalk connections.
1. Connect the short cable of a LocalTalk connector to the printer's
LocalTalk port.
2. Connect the short cable of another LocalTalk connector to your
computer's LocalTalk port.
3. Connect a LocalTalk cable from the LocalTalk connector that you
have just attached to your computer to the printer's LocalTalk
connector.
For details on how to select the printer in the Chooser, change the printer’s
name, or set the printer’s zone, refer to the manual Phaser 220 Drivers and
Utilities Printing Reference. If you have no other connections to make, turn
immediately to “Connecting the power and turning on the printer” on
page 2-19.
8869-24
3
2 1
LocalTalk®