Tektronix 220e - Manual (Page 101)

Front and Rear Panels 7
User Manual 7-5
Note If your printer is on a network and you have changed rear panel
Switches 8 or 9, make sure you tell other users on the network,
since the switches affect all prints made with non-Tektronix
drivers or the Use Printer Setting option in the Tektronix
drivers. Color correction selections made in the Phaser 220 driver
take priority over selections made by setting the printer’s
rear-panel DIP switches.
Phaser 220i DIP Switches 2, 3, and 4
Switch 2 Switch 3 Switch 4 Function
Down Down Down Default, normal operation
Up Down Down For qualified service personnel
Down Up Down For qualified service personnel
Up Up Down For qualified service personnel
Down Down Up Prints configuration page*
Up Down Up Enables printing of sample prints at
power-up
Down Up Up Not used
Up Up Up Not used
*To print the configuration page, first set Switches 2, 3, and 4 down. After about
5 seconds, set Switch 4 up.
Phaser 220i DIP Switches 8 and 9
Switch 8 Switch 9 Function
Down Down No color correction (factory default).
Down Up SWOP Press.
Up Down Vivid Blue.
Up Up Variable. Vivid blue is the default, but you can change this
setting by using files on the Phaser 220 drivers and utilities
diskettes.