Adjusting the audio, Using the srs wow™ surround sound feature, Selecting the optical audio output format – Toshiba 27HL95 User Manual

Page 72: Continued)

Chapter 8: Using the TV’s features

(E) 27HL95 *Web 213 : 276

Adjusting the audio

(continued)

Using the SRS WOW™ surround sound
feature

WOW™ is a special combination of SRS Labs audio
technologies (SRS 3D, FOCUS, and TruBass) that creates a
thrilling surround sound experience with deep, rich bass from
stereo sound sources. Your TV’s audio will sound fuller, richer,
and wider.

To adjust the WOW™ settings:

1. Put the TV in STEREO mode (see “Selecting stereo/SAP

broadcasts” on page 70).

2. Press MENU and open the Audio menu.
3. Highlight Advanced Audio Settings and press ENTER.

Audio Settings

Advanced Audio Settings

Audio Setup

Audio

4. Press

zy to highlight the WOW feature you want to

adjust, and then press

x • to adjust the item.

Done

Advanced Audio Settings

WOW: SRS 3D

WOW: FOCUS

WOW: TruBass

Low

Reset

Off

• WOW: SRS 3D — To turn the surround sound effect On

or Off.

Note: If the broadcast is monaural, the 3D effect does not
work.

• WOW: FOCUS — To turn the vocal emphasis effect On

or Off.

• WOW: TruBass — To select the desired bass expansion

level (High, Low, or Off ).

5. To save the new settings, highlight Done and press

ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.

Selecting the optical audio output
format

Use this feature to select the optical audio output format when
you connect a Dolby Digital decoder or other digital audio
system to the Optical Audio Out terminal on the TV (see
“Connecting a digital audio system” on page 20).

To select the optical audio output format:

1. Press MENU and open the Audio menu.
2. Highlight Audio Setup and press ENTER.

Audio Settings

Advanced Audio Settings

Audio Setup

Audio

3. Press

z to highlight the Optical Output Format field, and

then press

x • to select either Dolby Digital or PCM,

depending on your device.

Done

Audio Setup

MTS

Language

Optical Output Format

Dolby Digital

Reset

Stereo

English

4. To save the new settings, highlight Done and press

ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.

#01E_065-072_27HL95

05.9.12, 15:46

Black