Toshiba 27HL95 - Manual (Page 56)

56 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HL95 *Web 213 : 276
To select the video input source to view:
1. Press INPUT on the remote control or TV/VIDEO on the
TV top panel.
2. Press 0–6 to select the input source you want to view, which
will depend on the input terminals you used to connect
your devices (see Chapter 2).
The current signal source displays in the top right corner of
the Input Selection screen.
Input Selection ANT 1
ANT 1 ANT 1
Video 1
Video 2
ColorStream HD
HDMI
PC
ANT 2
- / to Select INPUT
0
0
1
2
3
4
5
6
6
Note:
• When the Input Selection screen is open, you also can use yz on
the remote control (or the CHANNEL yz on the top panel) to
change the input.
• You can repeatedly press INPUT on the remote control or TV/
VIDEO on the TV top panel to change the input.
• You can label the video input sources according to the specific
devices you have connected to the TV (see “Labeling the video
input sources” on the next page).
• The source can be “hidden.” See page 57 for details.
TV/VIDEO
TV top panel
Using the TV’s features
CHANNEL zy
Selecting the video input source to view
{
8
INPUT
y
z
Numbers
Remote control
#01E_056-064_27HL95 05.9.12, 15:41 56
Black