Toshiba 27HL95 - Manual (Page 24)

Chapter 3: Using the remote control
24 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HL95 *Web 213 : 276
Programming the remote control to operate a
cable converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To
program your TV remote control to operate a non-Toshiba device (or a Toshiba device
that it is not preprogrammed to operate), follow the steps below. For details on using
the remote control to operate the device, see pages 26–27.
1. In the remote control code table (below and on the next page), find the code for
your device. If more than one code is listed, try each one separately until you find
one that works.
2. Set the Device Switch to the type of device you are programming the remote
control to operate — CBL/SAT (for a cable converter box or satellite receiver),
VCR (for a VCR or TV/VCR combo), or DVD (for a DVD player or HTIB
[home theater in a box]).
3. While holding down RECALL, press the Channel Number buttons to enter the 3-
digit code for your device.
4. To test the code, turn on the device, point the remote control at it, and press
POWER. See note at right.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1–4 using another code.
• If the device does not respond to another code, you will need to use the remote
control that came with the device.
5. Remember to set the Device Switch back to TV to control the TV.
6. For future reference, write down the code(s) you used:
Remote control codes
In some cases you may not be able to operate your device with the TV remote control.
Your other device may use a code that is not recognized by the TV remote control. If
this happens, use the device’s remote control.
Note:
• In addition to POWER, confirm that all
necessary keys on the TV remote control
operate your device. If some keys are not
operational, repeat the device code setup
using another code (if other codes are listed
for your device). If, after trying all listed codes,
the necessary keys do not operate your
device, use the device’s original remote
control.
• Every time you change the batteries, you will
need to reprogram the remote control.
• Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
“VCR1/VCR2.” If your VCR has this kind of
switch and does not respond to the codes for
your VCR brand, set the switch to the other
position (“VCR1” or “VCR2”) and reprogram
the remote control.
POWER
Channel
Numbers
Device Switch
RECALL
DEVICE CODE DEVICE CODE
Cable converter
box
ABC: 061, 062, 063,
082, 084, 087, 091,
092, 096, 098
Archer: 065, 092, 097,
099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,
088, 093, 098
Diamond: 093
Eagle: 091
GE: 061, 062
Gemini: 069, 070, 094
General Instruments:
062, 089, 096
Hamlin: 093
Hitachi: 062, 095, 096
Jasco: 097
Jerrold: 062, 069, 071,
082, 086, 089, 091,
096
Magnavox: 072, 096
Memorex: 091, 092, 104
Multi Canal: 090
Novavision: 101
Panasonic: 081, 083, 085
Philco: 087
Philips: 066, 067, 068,
070, 072, 073, 074,
075, 091, 092
Pioneer: 076, 077
Proscan: 061, 062
Radio Shack: 092, 097,
099
RCA: 064, 081
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,
078, 079, 080, 088,
098, 101, 105
Sears: 095
Signature: 062
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,
096, 103, 104
Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
Texscan: 100
Tocom: 071, 084, 085
U. S. Electronics: 087,
096, 098
United Cable: 082
Universal: 065, 092, 097,
099, 102, 103
Wards: 096
Satellite receiver
Alphastar: 038, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044,
046, 050, 053
Echostar: 018, 041, 051
Express Vu: 057
Fujitsu: 027
GE: 008, 009, 013
General Instruments:
010, 011, 012, 022,
023, 031, 049
Hitachi: 033
Hughes: 033
Hughes Network
Systems: 019
Intersat: 048
Janeil: 027
JVC: 017, 057
Kenwood: 029
Magnavox: 060
Optimus: 058
Pansat: 036, 052
Primestar: 015, 042
Proscan: 008, 009, 013
Radio Shack: 022, 023,
030
#01E_023-028_27HL95 05.9.12, 15:34 24
Black