Toshiba B-570 - Manual (Page 57)

6-26
EM18-33010A 6. DIAG. TEST OPERATION
•
0 (without slash)
•
ø (with slash)
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables
a fast forward.
2. A changed zero font is stored in memory by pressing the [PAUSE] key.
6.3 PARAMETER SETTING MODE
6.3.7 Font Zero Selection
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key eight times.
Select either zero font with the
[FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time. Press the [PAUSE] key.
Continued on Section 6.3.8
Control code selection.
< 1 D I A G N O S T I C V 1 . O A >
< 2 P A R A M E T E R S E T >
Z E O F O N T 0 R