Toshiba B-570 - Manual (Page 40)

6-9
EM18-33010A 6. DIAG. TEST OPERATION
SENSOR1
Head up switch status
Fixed to 1
Cutter home position switch status
0: Head opened
1: Head closed
0: Home position
1: Other position
Rewind full sensor status
Fixed to 0
Fixed to 0
Slit sensor #1 (ribbon rewind) status
0: Normal
1: Excess
Strip sensor status
0: Without label
1: With label
Ribbon end sensor status
0: Transmissive (with ribbon)
1: Non-transmissive (ribbon end)
0: The detecting point is positioned
outside the slit.
1: The detecting point is positioned
inside the slit.
Slit sensor #2 (ribbon feed) status
0: The detecting point is
positioned outside the slit.
1: The detecting point is
positioned inside the slit.
0 0 0 0 0 0 0 0 , 1 0 1 1 0 0 1 1
6.2 SELF TEST MODE
6 Sensor 1 Check