Toshiba B-570 - Manual (Page 54)

6-23
EM18-33010A 6. DIAG. TEST OPERATION
NOTES: 1. The X axis fine adjustment is performed to fine adjust the X axis of the drawing in the
left or right direction.
2. Adjust the X axis in the effective print range. (After the value reaches the coordinate
“0”, the value remains unchanged even if the subsequent fine adjustment is
performed in the negative direction.)
3. X axis fine adjustment cannot be used in self test mode or test printing.
Fig. 6-18
Fig. 6-19
Fig. 6-20
6.3 PARAMETER SETTING MODE
■ X Axis Fine Adjustment Example
ABC
ABC
ABC
Y
X
Y
Bottom first printing
+ 0.0 mm
-50.0 mm
+50.0 mm
-50.0 mm
+ 50.0 mm
Top first printing
X
Feed direction