TRENDnet TE100-MP1U - Manual (Page 82)

82
Chapter12 Troubleshooting
This chapter provides useful information to help you resolve difficulties that you may
experience with your Server. Fault symptoms, possible causes, and remedial actions
are provided within a quick reference table. This Server’s USB ports only support MFPs,
printers, scanners, and mass storage.
12.1 LED Indicators
Indicators Behavior Description
Power On Power On
Off Power off/System error
Link On Network connected
Off No physical connection to network
Status Blinking Activity on network
Off No activity on network
USB1 On USB device connected
Blinking Connected USB device error
Off No physical connection to USB device
USB2 On USB device connected
Blinking Connected USB device error
Off No physical connection to USB device
12.2 Firewall
If a firewall software has been installed on your PC, it may block the communication
between the PC and the MFP Server so that the MFP Server can not work properly. To
solve this problem, either disable the firewall or configure the firewall to allow the
following TCP and UDP ports:
7303, 7305, 20005, 30201, 30202, 30203