TRENDnet TE100-MP1U - Manual (Page 24)

24
5. Choose whether you want to share the printer with other network users. Do
you want to print a test page? Select the appropriate radio button and click
Next and Finish.
4.4 Adding Network Printers in Windows
Follow the instructions below to use the standard Windows Add Printer Wizard and the
Control Center for adding a network printer in Windows 98 SE, ME, 2000, XP and
2003.
#
Note:
1. Before adding a network printer, you are advised to install the local Windows
printer driver in advance.
2. Before using network printer, you have to turn on “Use Printer Online” in
installed network printer driver and then you can use the printer.
3. A computer using LPR or IPP printing and a computer using NetUSB printing
can not print documents to the same printer simultaneously
4. To find the Port name/Queue name, refer to “Supported Protocol Status” on
page 73.
4.4.1 Using Standard Windows Methods for LPR Printing Protocol
Windows Platform: Windows 2000, XP and 2003
1. Open Printers and Faxes
2. Right-click the printer for which you want to change settings, and then click
Properties/ports
3. Clear Enable bidirectional support and click Add port, and then click
Standard TCP/IP Port from the dropdown and click New port.
4. The "Add Standard TCP/IP Printer Port Wizard" will pop up and click Next.