TRENDnet TE100-MP1U - Manual (Page 75)

75
storage or printer with user level security which requires user name
and password to login. If you clear the item, your storage will be
shared without security.
5 Enable FTP Server: select or clear Enable FTP Server support. It is
enabled in Factory Default and users may set some parameters as
follows:
- FTP Port: enter an integer number to set FTP server’s TCP port
(default: 21)
- Set Maximum Session Number: select or clear Set Maximum
Session Number support. You can limit the FTP session number by
selecting the support and enter an integer to set the allowable
maximum session number. If you clear the support, it means that
FTP server will have not any limitation in session number.
- Set Passive Mode: select or clear Set Passive Mode support that
FTP server can accept passive mode.
- Enable Server Authentication: select or clear Enable Server
Authentication support. If you select the support, you need to
enter user name and password to login to the Server. If you clear
the support, you do not need user name and password to enter the
Server.
- Allow Anonymous Login: select the item, if you want to allow the
user “anonymous” to login to your FTP server with Read-Only
permission and FTP server will not check the password. If you clear
the item, your FTP server will not support anonymous login
function.
5 Enable UPnP (Universal Plug and Play): select or clear Enable UPnP
support. It is enabled in Factory Default.