TRENDnet TE100-MP1U - Manual (Page 33)

33
5. If you cannot find any printer driver in Printer List, please install your printer
driver first or click Add New Printer to install the printer driver.
4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
#
Before using SMB/CIFS printing, you have to login the SMB/CIF Print/File
server in advance and then you may use it; otherwise you have to disable
SMB/CIFS Print/File Server Authentication.
# If you use SMB on Windows 98 SE/ME with Server Authentication, you must
login to your Windows 98 SE/ME using the same user name as in the Server’s
User Account.
Windows Platform: Windows 98SE, ME, 2000, XP and 2003
1. Open Printers and Faxes
2. Right-click the printer for which you want to change settings, and then click
Properties.
3. Click the Ports tab.
4. Clear Enable bidirectional support and click add port, and click Local Port,
and then click New Port… in the Printer Ports box.
5. In the Port Name box, enter the path to the printer with the following
format: ”\\ Server’s Server Name\printer name” or ”\\ Server’s IP
address\printer name” (Please refer to the Server’s web pages or the Control
Center to know exact path). For example: if you set the server name as
“TE100-MP2U” and the printer name (USB1 port) as PhotoSmart2, then the
network path is expressed as: \\ TE100-MP2U\Photosmart 2