TRENDnet TE100-MP1U - Manual (Page 74)

74
9.2.2 Setting up Server Configuration
To set up the Server configuration, the system will request user to enter administrator
(default: admin) and password (default: admin) to login.
„
General Configuration
Š
Server Information: You have to set some information for networking
using SMB protocol:
5 Server Name: the name to represent the Server for using SMB
protocol
5 Workgroup: the name of the SMB workgroup that the Server belongs
to.
5 Description: optionally set to describe the Server
Š File Server Codepage: if users want to communicate files using FTP
client tool or SMB on Windows 98 SE/Me/2000 with the Server, they have
to set their Server codepage to be same as the codepage that their
Windows PC is using. Generally, the criteria of choosing codepage are
based on your Windows codepage. For example, if your Windows
codepage is Traditional Chinese, you have to select Traditional Chinese
(Big5) in the Server. Please refer to the chapter “File Server”.
„
TCP/IP: You have to set the Server’s TCP/IP configuration to connect TCP/IP
network. Please see Chapter 3 Basic Installation for more details.
„
Supported Protocols: The Server supports the following TCP/IP protocols:
Š TCP/IP
5 Enable LPR (Line Printer Remote) Printing: select or clear Enable LPR
Printing support. It is enabled in Factory Default.
5 Enable IPP Printing: select or clear Enable IPP Printing support. It is
enabled in Factory Default.
5 Enable Raw TCP Printing: select or clear Enable Raw TCP Printing
support. It is enabled in Factory Default and users may set the
protocol’s TCP ports as following boxes:
- TCP Port 1: set TCP port for the printer of USB1 port (default: 9100)
- TCP Port 2: set TCP port for the printer of USB2 port (default: 9101)
5 Enable SMB/CIFS Print/File Server: select or clear Enable
SMB/CIFS Print/File Server support. It is enabled in Factory
Default.
- Enable Internet Access: select or clear Enable Internet Access
support. If you clear the item, you do not allow that users can
access your SMB/CIFS server via Internet. If you select the item,
you allow Internet users can access your storage using the
SMB/CIFS protocol.
- Enable Server Authentication: select or clear Enable Server
Authentication support. Select the item, if you want to share your