TRENDnet TE100-MP1U - Manual (Page 58)

58
G. PC will automatically detect the plug-in of the USB device. On the right side of
Windows Task Bar, you can see the information of the new device. Continue to
follow the user manual of the USB device to do the rest jobs of installation, until
the driver installation finished.
After the installation, you can see the newly created devices on the PC. If the USB
device is a MFP, you can see a new printer and a new scanner from the “Control Panel”.
7.3.2 NetUSB Printing
After the driver is installed as described in the previous section, you can see a newly
created printer in the Control Panel’s “Printers and Faxes”. Follow the steps below to
do a NetUSB printing.
A. In the Control Center, click the MFP Server that has the desired printer (or MFP)
attached.
B. Click the desired printer (or MFP).
C. Click the “Auto Connect Printer” button and choose “Set Auto-Connect Printer”.
The following figure will appear.