TRENDnet TE100-MP1U - Manual (Page 52)

52
4. Set up File Server Configuration:
A. Set SMB/CIFS Print/File Server
ƒ Enable SMB/CIFS Print/File Server: select the item, if you want to
support SMB/CIFS print/File server.
ƒ Enable Internet Access: clear the item, if you do not allow that users
can access your SMB/CIFS server via Internet. If you select the item,
you allow Internet users can access your storage using the SMB/CIFS
protocol.
ƒ Enable Server Authentication: select the item, if you want to share
your storage or printer with user level security which requires user
name and password to login. If you clear the item, your storage will be
shared without security.
B. Set FTP Server:
ƒ Enable FTP Server: select the item, if you want to support FTP server.
ƒ FTP port: enter the desired FTP port. The default value is 21.
ƒ Maximum Session Number: select the item and fill in desired
number.
ƒ Enable Passive Mode: select the item, if you want to allow that your
FTP server can accept passive mode command.
ƒ Enable Server Authentication: select the item, if you want to share
your storage with user level security which requires user name and
password to login. If you clear the item, your storage will be shared
without security.
ƒ Allow Anonymous Login: select the item, if you want to allow the
user “anonymous” to login your FTP server with read-only permission
and the Server will not check the password. If you clear the item, your
FTP server will not support anonymous login function.
C. Storage Access Mode: To use FTP and SMB/CIFS to access storage, please
set the storage access mode to the server mode. For the NetUSB mode,
please refer to chapter 9.
6.5.3 Using Shared Storages by SMB/CIFS Method for Windows
1. Connect a USB storage device to this product.
2. Select My Network Places