TRENDnet TE100-MP1U - Manual (Page 21)

21
dynamic using DHCP). When assigning a static IP address you also have to
define Subnet Mask and Default Gateway.
7. Click Submit to save your settings. And the Server will reboot. You have now
finished the procedure of setting the IP address.
3.4 Name of USB Device
3.4.1 Printer
Names
1. The system will set the printer model names as the default printer names.
The system only allows a 12-character long USB device name. For
example, the printer model name is “LaserJet 3030 PCL 6” and then the
default printer name will be set as “LaserJet 303”.
2. If system cannot get the printer model (For example, you use some
parallel printers and use Parallel-to-USB cables to connect the printers),
the default printer names are set as: USB1_Printer and USB2_Printer
with respect to USB1 port and USB2 port.
3.4.2 Storage Names
The local drives of the two storages in USB1 port and USB2 port are named as
USBx_DyPz, where USBx represents the USBx port, Dy represents the y-th Disk (in
particular to card reader plugging in multiple cards) and Pz represents the z-th
partition.