TRENDnet TE100-MP1U User Manual

Page 51

number.

Enable Passive Mode: select the item, if you want to allow that your

FTP server can accept passive mode command.

Enable Server Authentication: select the item, if you want to share

your storage with user level security which requires user name and
password to login. If you clear the item, your storage will be shared
without security.

Allow Anonymous Login: select the item, if you want to allow the

user “anonymous” to login your FTP server with read-only permission
and the Server will not check the password. If you clear the item, your
FTP server will not support anonymous login function.

Storage Access Mode: To use FTP and SMB/CIFS to access storage, please

set the storage access mode to the server mode. For the NetUSB mode,
please refer to chapter 9.

6.5.2

Setting up File Server Using Web Pages

1. Go to the web page, click CONFIG

2. Login your administrator (default: admin) and password (default: admin).

3. After you have logged in successfully, click Supported Protocols.

This manual is related to the following products:

TEW-MP2U