TANDBERG TT1260 - Manual (Page 74)

Options
Page 5-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
5.10 VideoGuard Director CA/TANDBERG Director
NCP (TT1260/SWO/DIR)
This option provides a software key to enable VideoGuard Director
CA/TANDBERG Director NCP.
The key is downloaded via the Ethernet or entered via the front panel
System Menu (#6), (see Annex C, Section C.9, System Menu). When the
key is downloaded, hidden functionality in the software is unlocked.
Contact TANDBERG Television Customer Services (refer to
Contact Information on page vii, Preliminary Pages).
5.11 BISS-1/BISS-E (TT1260/SWO/BISS)
This option provides a software key to enable BISS-1/BISS-E.
The key is downloaded via the Ethernet or entered via the front panel
System Menu (#6), (see Section C.9, System Menu). When the key is
downloaded, hidden functionality in the software is unlocked.
Contact TANDBERG Television Customer Services (refer to
Contact Information on page vii, Preliminary Pages).
5.12 XLR Cable (TT1260/CABLE/XLR)
The XLR Cable can be used for each of the two 9-pins D-type audio output
connectors on the TT1260. It has a 9-pin D-type audio connector on one
end and three XLR connectors on the other end.
Table 5.7: XLR Cable
Connection Outer Marking
Right Channel BALANCED AUDIO RIGHT
Left Channel BALANCED AUDIO LEFT
Digital BALANCED DIGITAL AUDIO
Table 5.8: XLR Audio Connector
Item Specification
Connector type 9-way, Female, D-type
Pin-outs Pin 1 ¾ Digital pin 2 +
Pin 2 ¾ Not used
Pin 3 ¾ Left Channel pin 2 +
Pin 4 ¾ Right Channel pin 2 +
Pin 5 ¾ Not used
Pin 6 ¾ Digital pin 3 -
Pin 7 ¾ Not used
Pin 8 ¾ Left Channel pin 3 -
Pin 9 ¾ Right Channel pin 3 -