TANDBERG TT1260 - Manual (Page 143)

Page F-1 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
Annex F
F. Factory Defaults
Units are shipped with the following factory default parameters. These can
be restored at any time using the System Menu. All other parameters are
unaffected by restoring the factory defaults.
Menu Page Description Default
#2 Input ASI 2.2 SOURCE AUTO
#2 Input
QPSK/8PSK/16
QAM 2.4 SOURCE 1
2.3 LNB FREQUENCY 10750.0 MHz
2.3.1 SATELLITE FREQUENCY 12168.0 MHz
2.3.2 SEARCH RANGE 3000 kHz (5000 kHz)
2.3.3 SYMBOL RATE 27.5Msym/s
2.3.4 MODULATION FEC QPSK auto
2.3.5 LNB POWER OFF
2.3.6 LNB 22 kHz Disabled
#3 Service 3.1.4 525LINE OUTPUT NTSC-M
3.1.4 625 LINE OUTPUT PAL B/G/I
3.1.5 DEFAULT LINE STANDARD 625
3.1.5 FAIL MODE FREEZE FRAME
3.1.6 TEST PATTERN NONE
3.1.7 FRAME SYNC DISABLED
3.1.8 FSYNC PAL OFFSET +0000
3.1.8 FSYNC NTSC OFFSET +0000
3.1.9 4:2:0 DELAY 040ms
3.1.9 4:2:2 DELAY 040ms
3.1.10 MONITOR ASPECT RATIO 16:9
3.1.10 OUTPUT LEVEL 100%
3.1.11 EMBEDDED AUDIO DID 2FFH
3.1.12 525 START LINE 23
3.1.12 EDH ENABLED
3.2.2 DELAY ADJUSTMENT +0.0ms
3.2.3 DIGITAL OUTPUT IEC958 CON