TANDBERG TT1260 - Manual (Page 109)

Technical Specification
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-17
ST.TM.E10100.1
B.6.3 Data Outputs
RS-232 Asynchronous (Low-speed) Data
This connector is located on the motherboard of the TT1260 Base Unit
(TT1260/DIRBAS).
Table B.23: RS-232 Asynchronous (Low-speed) Data Connector
Item Specification
Safety status SELV
Data-rates (bit/s) 1200; 2400; 4800; 9600; 19 200; 38 400
Standards EIA RS-232C / ITU-T BT. V.24/V.28
Line length < 15 metres
RS-422 Synchronous (High-speed) Data
This connector is located on the optional High Speed RS-422 Data Enabler
Card (TT1260/HWO/HSDATA).
Table B.24: RS-422 Synchronous (High-speed) Data Connector
Item Specification
Safety status SELV
Data-rates (bit/s) Integer multiples of 56 Kbit/s and 64 Kbit/s up to 2.048 Mbit/s
Standards EIA RS-422 / ITU-T V.11
Line length < 1200 metres
B.6.4 Remote Control Connector
Table B.25: Control Connector
Item Specification
Safety status SELV
Connector type 9-way D-type, male
Connector designation RCTRL RS-232/485
Standard EIA RS-232C/RS-485