Tektronix CSA8000B - Manual (Page 184)

Creating Math Waveforms
3- 110 CSA8000B & TDS8000B User Manual
Overview Related control elements & resources To use math waveforms (cont.)
Take automatic
measurements
5. Press the Vertical MATH button, and use the
numbered front-panel button to choose a math
waveform from M1 -- M8. (See right.)
6. Select one of the signal types, such as Pulse, and
then select a measurement category from the
measurement bar.
.
7. Click a measurement button. The instrument
automatically takes the measurement on the
waveform you selected in step 5.
8. Read the results in the measurements readout.
Tip. For more control of your measurement, go to
the Setup menu (in the application menu bar) and
select Measurements. Click the Help button in the
Measurements Setup dialog box that displays for
more information.