Toshiba RKP004Z - Manual (Page 29)

8. Operation by a copy function
8-2
8. 1 Copy to LCD
Push the F3 key on an initial screen and the copy mode screen is displayed. It is not
possible to drive with the [RUN] key in the following 3～5 screen display.
1
Select the memory saving group using the
control dial.
2
Select copy direction [Copy to the LCD
memory] using the control dial.
3
Display of copy waiting
Copy starts when the [F4] key is input.
4
Display of copy loading（fixed screen）
Copy finishes in 1 minute. When the copy
is not completed even if it waits 2 minutes
or more, please reset a power supply and
copy again.
Note) The status display（ ）doesn't rotate when
copying it while driving until the copy is completed.
5
Display of copy finish
Return to the copy direction window
as above “2” when press the ESC key
after copy.
C o p y w a s c o m p l e t e d n o r m a l l y.
Please push ESC-key.
CRC code：6AE3
Copy Mode
Group selection
Top Info
Memory - A
Memory - B
［ Copy to the inverter］
［Copy to the LCD memory］
Copy Mode
Memory - A
Top
Copy direction
Waiting
Please push F4 key
when starting
［LCD メモリへコピー］
Start
Copy Mode
Memory - A
Top
［ Copy to the LCD memory］
Loading
N o w l o a d i n g .
P l e a s e wa i t f o r a b o u t 1 m i n .
［LCD メモリへコピー］
Copy Mode
Memory - A
［ Copy to the LCD memory］
Copy Mode
Memory - A
Top
［ Copy to the LCD memory］
Finish
F4