Toshiba RKP004Z - Manual (Page 28)

8. Operation by a copy function
8-1
The copy function can be used when "Copy" is displayed on the upper part of the F3 key.
The copy function works by the latest combination of LCD Remote Keypad (RKP004Z rev.2 or
later) with the Inverter version of APP-CPU is V136 or more of VFAS1, V614 or more of
VFPS1. When either is old, this function does not work.
Version of APP-CPU
VFAS1 VFPS1
Limitation in copy function use
V134
or less
V136
or more
V612
or less
V614
or more
RKP004Z-1or0 Disabled Disabled Disabled Disabled LCD type form
After RKP004Z-2 Disabled Enabled Disabled Enabled
Moreover, it is not possible to copy normally in the following cases even if the copy
function can be used.
1) It is not possible to copy, when the inverter form differs,.
2) It is not possible to copy to the inverter while driving.
3) It is not possible to copy, when a minimum unit of the frequency is different.
4) It is necessary to reset up the parameters after the copy when copying between the
inverters from which capacity differs.
5) It is necessary to reset power supply after the copy when the unit of time differs.
„ Explanation of the top window
• Display of commands executed:
“FWD” or “REV” is displayed to indicate the direction of
rotation.
The operation frequency is displayed in the form of
“††.
† Hz.”
• Display of operating status:
“RUN” is displayed during operation.
“STOP” is displayed during a stop.
“Trip” is displayed in the event of tripping.
• Display of output frequency:
The operation frequency is displayed in the form of
“††.
† Hz.”
• Display of alarm/tripping:
If an error or tripping occurs, an error or trip code is displayed.
• Display of error/tripping message:
If an error or tripping occurs, an error or trip message is displayed
Functions of function keys
：
Switches between Quick mode and Standard Setting mode
： Brings you to the Language selection window.
： Brings you to Copy mode window.
8. Operation in a copy function
F1
F2
F3
Display of
commands
FWD 60.0 Hz RUN
60.0
Hz
Overheat alarm
Lng Quick Copy ---
Display of
operating status
Display of output frequency
Display of alarm/tripping
Display of error/tripping message
F1 F2 F3
Top View Mode