TRENDnet TE100 S810Fi - Manual (Page 73)

73
Roving Analysis State: Enable or disable the port mirror function.
Mirror Ports: The ports you want to mirror. All mirror port traffic will be
copied to mirror port. You can select max 9 monitor ports in the switch. If
you want to disable the function, you must select monitor port to none.
Monitor Rx: Monitored receive frames from the port.
Monitor Tx: Monitored send frames from the port.
5-4-10. SNMP
Any Network Management running the simple Network Management
Protocol (SNMP) can management the switch,
Provided the Management Information Base (MIB) is installed correctly on
the management station. The SNMP is a Protocol that governs the
transfer of information between management and agent. The
TE100-S810Fi supports SNMP V1.
1.
Use this page to define management stations as trap managers and to
enter SNMP community strings. User can also define a name, location,
and contact person for the switch. Fill in the system options data, then
click Apply to update the changes on this page
Name: Enter a name to be used for the switch.
Location: Enter the location of the switch.
Contact: Enter the name of a person or organization.