TRENDnet TE100 S810Fi - Manual (Page 36)

: Exit this page and return to previous menu.
4-3-7-4.Max bridge transmit delay bound
Max bridge transmit delay bound: Limit the packets queuing time in
switch. If enable, the packets queued exceed will be drop. Press Space
key to set the time. This valid value are 1sec, 2sec, 4sec and off. Default is
1 seconds.
Enable Delay Bound: Limit the low priority packets queuing time in switch.
If enable, the low priority packet stays in switch exceed Max Delay Time, it
will be sent. Press Space key to enable or disable this function.
Max Delay Time: To set the time that low priority packets queuing in
switch. The valid range is 1~255 ms.
NOTE: Make sure of
“Max bridge transit delay bound control” is enabled
before enable Delay Bound, because Enable Delay Bound must be work
under “Max bridge transit delay bound control is enabled” situation.
Actions->
: Configure all items. Finished configure press ESC to go back
action menu line.
: Save all configure value.