TRENDnet TE100 S810Fi - Manual (Page 65)

65
Query
A message sent from the querier (IGMP router or switch) asking for a
response from each host belonging to the multicast group.
Report
A message sent by a host to the querier to indicate that the host wants to be
or is a member of a given group indicated in the report message.
Leave
Group
A message sent by a host to the querier to indicate that the host has quit to
be a member of a specific multicast group.
5-4-6-2. Static MAC Address
When you add a static MAC address, it remains in the switch's address
table, regardless of whether the device is physically connected to the
switch. This saves the switch from having to re-learn a device's MAC
address when the disconnected or powered-off device is active on the
network again.
1. To add a static MAC address
2. From the main menu, click administrator, then click Filter Database.
3. Click Static MAC Addresses. In the MAC address box, enter the MAC
address to and from which the port should permanently forward traffic,
regardless of the device's network activity.
4. In the Port Number box, select a port number.
5. If tag-based (IEEE 802.1Q) VLANs are set up on the switch, static
addresses are associated with individual VLANs. Type the VID (tag-based
VLANs) to associate with the MAC address.