TRENDnet TE100 S810Fi - Manual (Page 71)

71
Prameter Description
Priority
You can change priority value, A value used to identify the root bridge. The
bridge with the lowest value has the highest priority and is selected as the
root. Enter a number 1 through 65535.
Max Age
You can change Max Age value, The number of seconds a bridge waits
without receiving Spanning-Tree Protocol configuration messages before
attempting a reconfiguration. Enter a number 6 through 40.
Hello
Time
You can change Hello time value, the number of seconds between the
transmission of Spanning-Tree Protocol configuration messages. Enter a
number 1 through 10.
Forward
Delay
time
You can change forward delay time, The number of seconds a port waits
before changing from its Spanning-Tree Protocol learning and listening
states to the forwarding state. Enter a number 4 through 30.
3. The following parameter can be configured on each port , click set
Apply button to modify .