TRENDnet TE100 S810Fi - Manual (Page 70)

5-4-8. Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method (IEEE
802.1D ) for avoiding loops in switched networks. When STP enabled, to
ensure that only one path at a time is active between any two nodes on the
network.
You can enable Spanning-
Tree Protocol on web management’s switch
setting advanced item, select enable Spanning-Tree protocol. We are
recommended that you enable STP on all switches ensures a single active
path on the network.
1. You can view spanning tree information about the Root Bridge.
Such as follow screen.
2. You can view spanning tree status about the switch. Such as
follow screen.