Toshiba Integrated High Definition LED Television 50L2200U - Manual (Page 79)

79 Using the TV’s features
Adjusting the audio
2 Highlight Digital Audio Selector, and then press the ENTER
button.
(Sample Illustration) Sound menu - Digital Audio Selector selection
3 Press the ( / arrow) buttons to select Digital Audio, and
then press the ( / arrow) buttons to select the desired
service.
4 Press the EXIT button.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, an icon or word
“SAP” appears when the INFO button is pressed. The MTS feature
is only available for analog signals on the ANT/CABLE input.
To listen in stereo sound:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the MTS field, select Stereo.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
❖
You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
❖
If the sound is noisy, select Mono to reduce the noise.
NOTE