Toshiba Integrated High Definition LED Television 50L2200U - Manual (Page 52)

52 Setting up your TV
Viewing the digital signal meter
mode.) See “Connecting an HDMI® or DVI device to the
HDMI® input” on page 27 .
(Sample Illustration) HDMI ® Audio mode selection
4 To save the setting, highlight Done, and then press the ENTER
button.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio
setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu. See
“Setting the PC Audio” on page 94 .
Viewing the digital signal meter
You can view the digital signal meter in the ANT/CABLE digital
TV input source only.
To view the digital signal meter:
1 Press the MENU button and open the Setup menu.
Mode: Description:
Auto
When viewing the HDMI 1 input, if digital audio from the HDMI ®
input is available, it will be output. If not, the TV will automatically
detect and output analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input, digital audio from the HDMI ®
input will be output.
Analog
When viewing the HDMI 1 input, analog audio from the PC Audio
input will be output.
NOTE