Toshiba Integrated High Definition LED Television 50L2200U - Manual (Page 34)

34 Connecting Your TV
Connecting a computer
To use a computer, set the monitor output resolution on the
computer before connecting it to the TV. The supported signal
formats are VGA, SVGA, XGA, WXGA and SXGA. For detailed
signal specifications, see
“Acceptable signal formats for PC IN,
HDMI®” on page 122 .
Other formats or non-standard signals will not be displayed
correctly.
To display the optimum picture, use the computer setting feature,
see
“Using the PC Settings feature” on page 93 .
❖
The PC audio input terminals on the TV are shared with the
HDMI 1 analog audio input terminals. For configuration
information, see
“Setting the PC Audio” on page 94 .
❖
Some computer models cannot be connected to this TV.
❖
If the computer has a compatible mini D-sub15-pin terminal, an
adapter is not required.
❖
Depending on the content’s title and the computer’s
specifications, some scenes may be skipped or you may not be
able to pause during multi-angle scenes.
Signal names for mini D-sub 15-pin connector:
Connection to the TV’s HDMI ® terminal
When connecting a computer with a DVI terminal on the TV, use an
HDMI
® -to-DVI adapter cable and analog audio cables.
When connecting a computer with an HDMI ® terminal, use an
HDMI ® cable (type A connector). Separate analog audio cables
may not be necessary, depending on computer hardware and setup,
see
“Connecting an HDMI® or DVI device to the HDMI® input”
on page 27 .
Pin No.: Signal Name: Pin No.: Signal Name: Pin No.: Signal Name:
1 R 6 Ground 11 Reserved
2 G 7 Ground 12 SDA
3 B 8 Ground 13 H-sync
4 Reserved 9 5V 14 V-sync
5 Ground 10 Ground 15 SCL
NOTE