Toshiba Integrated High Definition LED Television 50L2200U - Manual (Page 30)

30 Connecting Your TV
Connecting a digital audio system
❖
If several devices are connected, the HDMI ® CEC Control feature
may not operate properly.
❖
For proper operation, it is recommended that you use an HDMI ®
cable with the HDMI ® Logo ( ).
Before controlling the device(s):
❖
After completing the above connections, configure the HDMI ®
CEC Setup menu with the desired settings, see “HDMI® CEC
input source selection” on page 106 .
❖
The connected devices must also be configured. For details, see
the operation manual for each device.
❖
This feature uses the CEC technology as regulated by the
HDMI
® standard.
❖
This feature is limited to models incorporating Toshiba’s
HDMI
® CEC. However, Toshiba is not liable for those
operations. Refer to the individual instruction manuals for
compatibility information.
This feature may not work properly depending on the devices that are
connected.
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby ®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby
® Digital decoder or other
external audio system with optical audio input.
NOTE
NOTE