TDK GENESYS 750W HALF RACK User Manual
Page 16
83-507-5002 Rev. B
8
1.2.9 Cooling and mechanical construction
The Genesys
TM
series is cooled by internal fans. At the installation, care must be taken to allow
free airflow into the power supply via the front panel and out of the power supply via the rear
panel. The Genesys
TM
power supplies have a compact and lightweight package, which allows
easy installation and space saving in the application equipment.
1.3 ACCESSORIES
1.3.1 Included Accessories
The following accessories are delivered with the power supply:
1.3.1.1 Serial Link Cable
Serial link cable for linking power supplies by RS-485 communication.GEN/RJ45.
Cable description: 0.5m Length, shielded, RJ-45 type plugs, eight (8) contacts (P/N 15-507-201)
1.3.1.2 Hardware (delivered with power supply)
•
Strain Relief for AC Cord
•
Output terminal Shield
•
DB25 Programming Plug kit (AMP 749809-9)
•
Plastic legs for bench mounting.
•
Power Cord - See Para 1.3.3.
1.3.2 Optional Communication Cables (See Para. 7.5)
•
RS-232 Cables to connect GEN to Serial Port on PC
GEN to PC (DB9)
GEN 232/9
P/N 15-507-203
GEN to PC (DB25)
GEN 232/25
P/N 15-507-204
•
RS-485 Cable to connect GEN to Serial Port on PC
GEN to PC (DB9)
GEN/485-9
P/N 15-507-202)
1.3.3 AC cables
AC Cables are provided with 750W Model only, according to suffix in Model Number.
Part No.
Market
Description
NC301
(GEN/U)
USA
13A 125V, unshielded, 2m typical length, with IEC320 connector on one end
and NEMA-5-15P connector on the other end.
NC302
(GEN/E)
Europe
10A 250V, unshielded, 2m typical length, with IEC320 connector on one end
and INT’L 7 standard VII, dual earthing.
NC303
(GEN/O)
General
10A 250V, unshielded, 2m typical length, with IEC320 connector on one end
and unterminated stripped wires on the other end. Use the cable only with
plug approved by the national safety standards of the country of usage.
NC305
(GEN/J)
Japan
13A 125V,unshielded, 2m typical length, with IEC320 connector on one end
and Japan type plug on the other end.
NC306
(GEN/GB)
UK
10A 250V unshielded, 2m typical length, with IEC320 connector on one end
and UK type plug on the other end.
CAUTION
Observe all torque guidelines within this manual. Applying more torque may
damage unit or accessories. Such damage is not covered under manufacturers
warranty.