TDK ZACT2230-ME User Manual
TDK Tools
(1/2)
005-01 / 20090226 / e9111_zact_me.fm
• All specifications are subject to change without notice.
EMC Filters for AC Power Line
For Triple-phase, Large-size Box Cased ZACT-ME Series
FEATURES
• While reducing the filter size, the highly efficient thermal design
allows the handling of large currents with high attenuation.
• They are highly effective at preventing both the radiation and
penetration of EMC noise. The parts are, therefore, highly
immune to externally generated noise and do not, themselves,
serve as sources of radiated noise
• For the frequency band set by CISPR, attenuation is shown for
both differential mode and common mode noise components.
• Can withstand voltages of AC.1250V between the lines, and AC.
2000V between the line to ground.
• It is a product conforming to RoHS directive.
APPLICATIONS
Computers, HDDs, electronic exchange devices, NC control
devices, inverters for motor, etc.
SAFETY STANDARDS
SHAPES AND DIMENSIONS
Dimensions in mm
• Case: metal, terminal: stud
ELECTRICAL CHARACTERISTICS
Conformity to RoHS Directive
Part No.
Standard and standard No.
U.S.A.
Canada
Europe
UL1283
CSA C22.2 No.8
EN60939
ZACT2230-ME
LR76849C
P08208997
UL
CSA
NEMKO
Part No.
A
B
C
D
E
F
øG
H
I
J
K
ZACT2230-ME
120
200
115
260
100
220
M6
5.5
64
66
240
Part No.
ZACT2230-ME
Rated voltage Eac(V)
250
Rated current(A)
30
Test voltage Eac(V)[Between terminal and case]
2000
Insulation resistance(M
Ω)
[DC. 500V, 1min/between terminal and case]
100min.
Leakage current(mA)[250V • 60Hz]
1max.
DC resistance(m
Ω)
40max.
Operating temperature range(°C)[Including self-temperature rise]
–25 to +85
With derating over(°C)
45
Temperature rise(°C)
35max.
Attenuation frequency range
(MHz)[+5 to +35°C]
Differential mode at 40dB
0.15 to 10
Common mode at 40dB
0.15 to 10
Weight(kg)
5
C
J
øG
A
I
øH
E
H
B
F
D
R
1
S
1
T
1
R
2
S
2
T
2
K
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.