Oricom ULTRA 9400 - Manual (Page 8)

6
Base Station
1. Choose an area near a power point and a telephone
wall jack socket, and place your cordless telephone on a
level surface, such as a desktop or tabletop, or you may
mount it on the wall using the bracket required.
2. Plug one end of the telephone line cord into the TEL
LINE jack on the bottom of the base and the other end
into a modular jack.
3. Plug the AC power converter into the power point and
the DC connector into the jack on the bottom of the
base.
4. Place the handset in the base cradle. The charge/in use
indicator turns on, verifying the battery is charging.
5. Allow the phone to charge for 16 hours prior to first
use. If you don’t properly charge the phone, battery
performance will be compromised.
Use only the model 5-2760 power adaptor that came with
this unit. Using other power adaptors may damage the
unit.
!
CAUTION
GETTING STARTED