Oricom ULTRA 9400 - Manual (Page 27)

25
Two­Way Calling
1. During an external call, press the int/conf [ ] button,
and use the keypad to enter the handset number you
want to call.
Note:
The receiving handset presses the int/conf [ ] button to
answer the intercom call. Both intercom users may speak
privately. The external caller will not hear the intercom
conversation.
2. When finished, press the [ ] button or [ ] button
to end the intercom call, return to the talk mode, and
resume your original telephone conversation.
Three­Way Conference Calling
1. During an external call, press the int/conf [ ] button.
LINE ON HOLD EXTENSION? shows in the display.
2. Use the keypad to select Handset #. You will hear a
paging tone and PAGING shows in the originating
handset’s display.
Note:
PAGING FROM... shows in the display on the receiving
handset, and the receiving handset presses the int/conf
[ ] or [ ] button to answer the intercom.
3. When the receiving handset connects, press the int/conf
[ ] button on the originating handset to conference
with the receiving handset and the external caller.
CONFERENCE shows in the display on the originating
and receiving handsets.
Note:
A handset can enter conference mode directly by pressing
[ ] on the second handset during a call.
WARNING:
During a conference call involving the base speakerphone and
a cordless handset, avoid bringing the handset close to the
speakerphone because of the possibility of acoustic feedback
causing unwanted annoyance.
TELEpHONE OpERATION